Mechanical characteristics:
The body adopts high-quality resin sand advanced castings
The base is seamlessly welded with steel plates, which bears the weight, reduces noise and vibration, and increases the stability of the machine
Imported guide rails and screws are used to ensure the accuracy of machine positioning and repeated positioning
Every step of high-speed spindle assembly is strictly controlled, high speed, low noise and long service life
It is easy to replace the model, you need to call the appropriate program and replace the fixture
Skeleton in place detection device can detect skeletons that are not in place, and alarm and stop in time to ensure that the guide pin is not interrupted
Main configuration:
1. Adopt Japanese Panasonic servo motor, imported screw and guide rail.
2. Adopt Japanese SMC cylinder and Japanese Koganei pneumatic solenoid valve.
3. Adopt Japan Keyence fiber optic sensor, Japan Omron photoelectric switch, Japan SMC magnetic switch.
4. The main shaft uses Japanese NSK high-speed bearings and Japanese Samsung belts
Main feature:
AC servo motor is used for the main shaft and each dimension, and the running speed and positioning speed of each axis are fast and accurate
It can realize the terminal winding, and the terminal winding can be vertical and horizontal
Replacement of winding type: just call the programmed program in the machine and replace the fixture
Thread processing method: a: pull off or cut off the blade; b: the waste wire falls into the waste wire groove
Programming method: touch screen programming, providing human-computer interactive visual teaching system to achieve WYSIWYG programming effect
Specifications:
Spindle spacing | 37mm |
Spindle number | 12 |
Spindle direction | Clockwise / counterclockwise / 360 ° |
Control axis | 4 |
Spindle speed | 15000rpm |
Three-dimensional travel | X:85 Y:85 Z:55 |
Spindle servo motor power | 1500W |
Applicable wire diameter | 0.02~0.5(increasing motor power can be applied to larger wire diameter) |
Voltage | AC 220V±10% |
Power | 2000W |
Maximum frame outer diameter | 30mm |
Compressed air | 0.4~0.6mpa |
Host size | 1100mm*800mm*1200mm |
Host weight | 500kg |