Product description:
This automatic assembly line is composed of feeding machine, ER3716 automatic 16-axis winding machine and automatic soldering machine. It has the characteristics of automatic feeding sorting detection, exchange of upper and lower material winding, etc., which is suitable for long-term large-volume orders.
This series of assembly lines can be designed and customized according to customer requirements.
Product Features:
1. The terminal can be wrapped in vertical and horizontal directions
2. The thread end processing method can be selected a: broken or blade cut; b: the waste wire falls into the waste wire groove
3. Replacement of winding type: just call the programmed program in the machine and replace the fixture
4. Programming method: touch screen programming, providing human-computer interactive visual teaching system to achieve WYSIWYG programming effect
5. Skeleton in place detection device can detect skeletons that are not installed in place, and alarm and stop in time to ensure that the guide needle is not interrupted
6. The guide pin bar is made of imported mold steel with verticality <0.01mm, parallelism <0.01mm / full length.
Main configuration:
1. Adopt Japanese Panasonic servo motor, imported screw and guide rail.
2. Adopt Japanese SMC cylinder and Japanese Koganei pneumatic solenoid valve.
3. Adopt Japan Keyence fiber optic sensor, Japan Omron photoelectric switch, Japan SMC magnetic switch.
4. The main shaft uses Japanese NSK high-speed bearings and Japanese Samsung belts.
Main work flow: vibration feeding --- winding --- rubber --- solder --- test
Specifications:
Automatic feeding | 350mm vibration disk automatic sorting |
Delivery method | Belt conveyor track |
Winding machine | Single machine 16 axis |
Spindle spacing | 37mm |
Spindle direction | Clockwise / Counterclockwise. Every circle / 360 ° |
Spindle speed | 15000rpm |
Three-dimensional travel | X:85 Y:85 Z:55 |
Spindle servo motor power | 750W |
Applicable wire diameter | 0.02-0.5( >0. 5mm,just increase the motor power) |
Voltage | AC220V±10% |
Power | ≥4000W |
Maximum frame outer diameter | 37mm |
Quick fixture interface inner diameter | 10mm |
Needle bar moving servo motor power | 400(X) 400(Y) 400(Z) |
Guide bar movement speed | 60mm/秒 |
Compressed air pressure | 0.4-0.6mpa |
Host size | 1100m*1060mm*1200mm |
Production line weight | 1500kg |